Results 1 to 2 of 2
September 21st, 2007, 01:50 PM #1
Jump Script Modification
- Join Date
- September 21st, 2007
I have been looking at the jump script provided by stevedawson.com and I want to try and implement it for the following.....
I need to mask the links for a number of different products from a certain website.
The links are the same for all products except for a product code identifier on the end of each link.
What I would like to do is mask all of the link except for the product code and then the links on my website would be:
Is this possible?
I would really appreciate it if anyone has an idea how to achieve this.
October 3rd, 2007, 02:09 PM #2
- Join Date
- January 17th, 2005
Do you mean that you'd just like to go ahead and make the links without having to go into the Script itself and make different m=###'s ? If so, I'm sure not. I use Dawsons jump script, and as tiring as it is, you have to keep going in there and making a line within the script for each product.
BTW, you do know that you can rename the script from JUMP to anything you want to name it, right? Even a Single Letter. Since you're marked as Newbie thought I'd mention that.
By tsmgroup2 in forum WebMerge (Fourthworld.com)Replies: 12Last Post: May 10th, 2009, 05:04 PM
By trev0006 in forum Commission Junction - CJReplies: 0Last Post: October 27th, 2006, 03:58 AM
By gm1234 in forum Commission Junction - CJReplies: 1Last Post: November 5th, 2004, 12:44 AM
By dak142 in forum Programming / Datafeeds / ToolsReplies: 11Last Post: April 13th, 2004, 06:29 PM