Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    February 13th, 2005
    Posts
    69
    InstrumentPro Module CJ version?
    From InstrumentProAffiliates.com :

    "InstrumentPro's MyAP program will shut down September 30th."

    Is DySE:InstrumentPro script for CJ program available?


    Regards,
    Sjarief

  2. #2
    ABW Ambassador cusimano's Avatar
    Join Date
    January 18th, 2005
    Location
    Toronto, Canada
    Posts
    1,369
    DySE::InstrumentPro v7.09.26 uses cj.com.
    See upgrade instructions.

    Yours truly,
    Cusimano.Com Corporation
    per: David Cusimano

  3. #3
    Member
    Join Date
    February 13th, 2005
    Posts
    69
    Thanks David, I've sent my new key file request.

    Regards,
    Sjarief Hilmy

  4. #4
    Newbie
    Join Date
    July 4th, 2007
    Posts
    3
    can't run make.pl
    I can't run the make.pl file from my browser.

    I get the error page:

    no database file: 'instrumentpro'. Run make.pl. No database file: /home/pathto/public_html/cgi-bin/dyse/instrumentpro/data/data.db

    I adjusted my cron to run immediately but get a permission denied message

    site is down...help

    Ron

  5. #5
    ABW Ambassador cusimano's Avatar
    Join Date
    January 18th, 2005
    Location
    Toronto, Canada
    Posts
    1,369
    You're probably getting a "500 internal server error" and your server is configured (via .htaccess) to redirect such server errors to your home page. And I assume that your home page is configured (via .htaccess) to access view.pl. And since there's no database (since make.pl can't run), view.pl reports that there's no database.

    Take the usual setps to fix a "500 internal server error". Reupload make.pl in ASCII mode, chmod 755 on the make.pl file, change the first line of make.pl to your perl path if different, check chmod on the instrumentpro directory (chmod 755 typically works best), check chmod on the dyse directory (chmod 755 typically works best). If all that fails, contact your hosting company and ask: if your server supports perl cgi-bin, where perl is located, if perl scripts need to end in .pl or .cgi, where perl scripts should be uploaded to (/public_html/cgi-bin/ or somewhere else).

    Yours truly,
    Cusimano.Com Corporation
    per: David Cusimano

  6. #6
    Newbie
    Join Date
    July 4th, 2007
    Posts
    3
    Thanks!
    Thanks David

    I would've sworn on a stack of biblical sites that I had gone through all those
    steps numerous times but for some reason, after I tried one last time, it worked.

    You have my sincerest gratitude!
    ...sorry I can't send money right now!

    Ron Berry
    Last edited by iopsrb1; September 28th, 2007 at 07:29 PM. Reason: edited for television

  7. Newsletter Signup

+ Reply to Thread

Similar Threads

  1. Drupal 7 AvantLink Module Started
    By John Powell in forum AvantLink -AV
    Replies: 15
    Last Post: June 5th, 2011, 02:33 AM
  2. Good joomla/mambo component or module for CJ?
    By duckpond in forum Commission Junction - CJ
    Replies: 11
    Last Post: February 7th, 2007, 11:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •